- Главная
- Разное
- Дизайн
- Бизнес и предпринимательство
- Аналитика
- Образование
- Развлечения
- Красота и здоровье
- Финансы
- Государство
- Путешествия
- Спорт
- Недвижимость
- Армия
- Графика
- Культурология
- Еда и кулинария
- Лингвистика
- Английский язык
- Астрономия
- Алгебра
- Биология
- География
- Детские презентации
- Информатика
- История
- Литература
- Маркетинг
- Математика
- Медицина
- Менеджмент
- Музыка
- МХК
- Немецкий язык
- ОБЖ
- Обществознание
- Окружающий мир
- Педагогика
- Русский язык
- Технология
- Физика
- Философия
- Химия
- Шаблоны, картинки для презентаций
- Экология
- Экономика
- Юриспруденция
Yi сamera usb. Guide презентация
Содержание
- 1. Yi сamera usb. Guide
- 2. File list 1. setup.exe
- 3. Installing and Updating Double click on
- 4. Preparing the Hardware: Dismantle the front
- 5. Preparing the Hardware: image
- 6. Updating the Firmware Open yiSportCamUSB
- 7. Updating the Firmware Check “Firmware Programming” radio
- 8. Updating the Firmware 4. Click on “Choose” button and choose the option YDXJV22_1.2.6**.elf
- 9. Updating the Firmware 5. Click on “Download”
File list
1. setup.exe update tool 2. YDXJ**.elf firmware file note: Check your camera SN at the battery compartment Z2215**
Слайд 2File list
1. setup.exe
update tool
2. YDXJ**.elf
firmware file
note:
Check your camera SN at the battery compartment
Z2215** matches YDXJV22_1.2.6**.elf
Z22L5** matches YDXJV22L_1.2.6**.elf
Check your camera SN at the battery compartment
Z2215** matches YDXJV22_1.2.6**.elf
Z22L5** matches YDXJV22L_1.2.6**.elf
Слайд 3Installing and Updating
Double click on “setup.exe” and Install the USB tool
It’s
named as “yiSportCamUSB”
Слайд 4Preparing the Hardware:
Dismantle the front panel of the camera
Connect the camera
USB to PC with a micro USB cable
Use tweezers to short-circuit in two points
> One point above the Resistor
> One point at GND
Press the power button and turn on the camera
Use tweezers to short-circuit in two points
> One point above the Resistor
> One point at GND
Press the power button and turn on the camera
Слайд 7Updating the Firmware
Check “Firmware Programming” radio button
Click on “Connect” button
If the
short-circuit is successful, yiSportCamUSB will prompt “Found 1 YDXJ device!”
Слайд 9Updating the Firmware
5. Click on “Download” button and update the firmware
The status label will show “OK”, the text will show “Done!!” and
the camera will beep 3 times later.
Now, the upgrade is complete.
the camera will beep 3 times later.
Now, the upgrade is complete.
