- Главная
- Разное
- Дизайн
- Бизнес и предпринимательство
- Аналитика
- Образование
- Развлечения
- Красота и здоровье
- Финансы
- Государство
- Путешествия
- Спорт
- Недвижимость
- Армия
- Графика
- Культурология
- Еда и кулинария
- Лингвистика
- Английский язык
- Астрономия
- Алгебра
- Биология
- География
- Детские презентации
- Информатика
- История
- Литература
- Маркетинг
- Математика
- Медицина
- Менеджмент
- Музыка
- МХК
- Немецкий язык
- ОБЖ
- Обществознание
- Окружающий мир
- Педагогика
- Русский язык
- Технология
- Физика
- Философия
- Химия
- Шаблоны, картинки для презентаций
- Экология
- Экономика
- Юриспруденция
CiGe Update firmware Using the tutorial презентация
Содержание
- 1. CiGe Update firmware Using the tutorial
- 2. Step 1 unzip files“”BeTools
- 3. Step 2 Open “BeTools.exe”
- 4. Step 3 Choose
- 5. Step 4 Open
- 6. Step 5 Choose “ZZZZZZZZZZZZZZZZZZZZZZZZ_160530定 (1).key”
- 7. Step 6 Choose
- 8. Step 7 Open
- 9. Step 8 Open firmware file folder ，Choose “·········.sca” file
- 10. Step 9 1.Turn off your tablet
- 11. Upgrading...
- 12. upgrade is complete
- 13. Step 10 Unplug the USB, according to
- 14. Instructions 1 if tablet PC boot is
- 15. Instructions 2 Press the reset button to confirm the device is turned off
Слайд 10Step 9
1.Turn off your tablet
2. Use USB connected to the
compute
3.The system automatically upgradeds
3.The system automatically upgradeds
Слайд 13Step 10
Unplug the USB, according to open the key switch on.
After
firmware are chosen for the tablet was turned off, use USB connected to the computer, the computer will automatically install the tablet driver (shown in the lower right corner, if prompted to install successfully, the computer can support to upgrade the tablet, if prompted to install is not successful, the computer does not support to upgrade the tablet computer, need to change a computer to operate or computer reinstall Windows 7 or Windows XP operating system), driver installation, system will automatically jump to upgrade section, start is to display the blue, wait for good upgrade, will become white or green (i.e., upgrade to 100% of the time), you can unplug the USB, according to open the key switch on.
Слайд 14Instructions 1
if tablet PC boot is not normal display ，please at
“step 8” Re-select other the “·······.sca ”file
